3D Printed Gingerbread Family – Man, Woman, Boy, and Girl – 4in and 3in Sizes – Holiday Décor
from $3.99
The 3D Printed Articulating Gingerbread Man are printed in PLA.
Size: Gingerbread Man 4 inches tall - Gingerbread Children 3 inches tall
The Gingerbread Men come with ether a keychain or an ornament hook depending on which one you selected.
Add Festive Cheer with 3D Printed Articulating Gingerbread Family!
These 3D Printed Articulating Gingerbread Figures are crafted in PLA and make a delightful addition to your holiday décor or as unique keychains and ornaments. Available in the following sizes:
Gingerbread Man: 4 inches tall
Gingerbread Woman: 4 inches tall
Gingerbread Boy: 3 inches tall
Gingerbread Girl: 3 inches tall
Each Gingerbread Figure comes with either a keychain or an ornament hook, depending on your selection.
Each Gingerbread Figure is made to order, specially for you.
The Gingerbread Figures take roughly 4 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These Gingerbread Figures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each figure will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by The Flexi Factory.
Thank you for your purchase and support!
Size: Gingerbread Man 4 inches tall - Gingerbread Children 3 inches tall
The Gingerbread Men come with ether a keychain or an ornament hook depending on which one you selected.
Add Festive Cheer with 3D Printed Articulating Gingerbread Family!
These 3D Printed Articulating Gingerbread Figures are crafted in PLA and make a delightful addition to your holiday décor or as unique keychains and ornaments. Available in the following sizes:
Gingerbread Man: 4 inches tall
Gingerbread Woman: 4 inches tall
Gingerbread Boy: 3 inches tall
Gingerbread Girl: 3 inches tall
Each Gingerbread Figure comes with either a keychain or an ornament hook, depending on your selection.
Each Gingerbread Figure is made to order, specially for you.
The Gingerbread Figures take roughly 4 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These Gingerbread Figures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each figure will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by The Flexi Factory.
Thank you for your purchase and support!
Size:
Style:
Quantity:
The 3D Printed Articulating Gingerbread Man are printed in PLA.
Size: Gingerbread Man 4 inches tall - Gingerbread Children 3 inches tall
The Gingerbread Men come with ether a keychain or an ornament hook depending on which one you selected.
Add Festive Cheer with 3D Printed Articulating Gingerbread Family!
These 3D Printed Articulating Gingerbread Figures are crafted in PLA and make a delightful addition to your holiday décor or as unique keychains and ornaments. Available in the following sizes:
Gingerbread Man: 4 inches tall
Gingerbread Woman: 4 inches tall
Gingerbread Boy: 3 inches tall
Gingerbread Girl: 3 inches tall
Each Gingerbread Figure comes with either a keychain or an ornament hook, depending on your selection.
Each Gingerbread Figure is made to order, specially for you.
The Gingerbread Figures take roughly 4 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These Gingerbread Figures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each figure will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by The Flexi Factory.
Thank you for your purchase and support!
Size: Gingerbread Man 4 inches tall - Gingerbread Children 3 inches tall
The Gingerbread Men come with ether a keychain or an ornament hook depending on which one you selected.
Add Festive Cheer with 3D Printed Articulating Gingerbread Family!
These 3D Printed Articulating Gingerbread Figures are crafted in PLA and make a delightful addition to your holiday décor or as unique keychains and ornaments. Available in the following sizes:
Gingerbread Man: 4 inches tall
Gingerbread Woman: 4 inches tall
Gingerbread Boy: 3 inches tall
Gingerbread Girl: 3 inches tall
Each Gingerbread Figure comes with either a keychain or an ornament hook, depending on your selection.
Each Gingerbread Figure is made to order, specially for you.
The Gingerbread Figures take roughly 4 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These Gingerbread Figures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each figure will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by The Flexi Factory.
Thank you for your purchase and support!
The 3D Printed Articulating Gingerbread Man are printed in PLA.
Size: Gingerbread Man 4 inches tall - Gingerbread Children 3 inches tall
The Gingerbread Men come with ether a keychain or an ornament hook depending on which one you selected.
Add Festive Cheer with 3D Printed Articulating Gingerbread Family!
These 3D Printed Articulating Gingerbread Figures are crafted in PLA and make a delightful addition to your holiday décor or as unique keychains and ornaments. Available in the following sizes:
Gingerbread Man: 4 inches tall
Gingerbread Woman: 4 inches tall
Gingerbread Boy: 3 inches tall
Gingerbread Girl: 3 inches tall
Each Gingerbread Figure comes with either a keychain or an ornament hook, depending on your selection.
Each Gingerbread Figure is made to order, specially for you.
The Gingerbread Figures take roughly 4 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These Gingerbread Figures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each figure will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by The Flexi Factory.
Thank you for your purchase and support!
Size: Gingerbread Man 4 inches tall - Gingerbread Children 3 inches tall
The Gingerbread Men come with ether a keychain or an ornament hook depending on which one you selected.
Add Festive Cheer with 3D Printed Articulating Gingerbread Family!
These 3D Printed Articulating Gingerbread Figures are crafted in PLA and make a delightful addition to your holiday décor or as unique keychains and ornaments. Available in the following sizes:
Gingerbread Man: 4 inches tall
Gingerbread Woman: 4 inches tall
Gingerbread Boy: 3 inches tall
Gingerbread Girl: 3 inches tall
Each Gingerbread Figure comes with either a keychain or an ornament hook, depending on your selection.
Each Gingerbread Figure is made to order, specially for you.
The Gingerbread Figures take roughly 4 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These Gingerbread Figures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each figure will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by The Flexi Factory.
Thank you for your purchase and support!