3D Printed Articulating Imperial Dragon – 19in and 25in Sizes – Flexi Dragon – Fidget Toy or Display Piece
from $12.99
Add an air of majesty to your collection with this 3D Printed Articulating Chinese Dragon! Available in two sizes—19 inches or 25 inches long—this dragon features flexible joints that allow lifelike movement along its sinuous body. Whether used as a fidget toy, a unique décor piece, or a thoughtful gift, this dragon brings elegance and playfulness to any space.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Chinese Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Chinese Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
Color:
Size:
Quantity:
Add an air of majesty to your collection with this 3D Printed Articulating Chinese Dragon! Available in two sizes—19 inches or 25 inches long—this dragon features flexible joints that allow lifelike movement along its sinuous body. Whether used as a fidget toy, a unique décor piece, or a thoughtful gift, this dragon brings elegance and playfulness to any space.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Chinese Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Chinese Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
Add an air of majesty to your collection with this 3D Printed Articulating Chinese Dragon! Available in two sizes—19 inches or 25 inches long—this dragon features flexible joints that allow lifelike movement along its sinuous body. Whether used as a fidget toy, a unique décor piece, or a thoughtful gift, this dragon brings elegance and playfulness to any space.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Chinese Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Chinese Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!