3D Printed Articulating Hammerhead Shark – 7in Long, 5in Wide – Flexi Ocean Toy
from $15.99
Bring the Ocean to Life with a 3D Printed Articulating Hammerhead Shark!
These 3D Printed Articulating Hammerheads are crafted in PLA and measure 7 inches long by 5 inches wide. With fully articulating joints from head to tail, this design captures the lifelike movement of this iconic ocean predator. Perfect as a unique gift, playful fidget toy, or captivating display piece for marine enthusiasts.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each Hammerhead Shark is made to order, specially for you.
The Hammerhead takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These sharks are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each Hammerhead Shark will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Cinderwing3D.
Thank you for your purchase and support!
These 3D Printed Articulating Hammerheads are crafted in PLA and measure 7 inches long by 5 inches wide. With fully articulating joints from head to tail, this design captures the lifelike movement of this iconic ocean predator. Perfect as a unique gift, playful fidget toy, or captivating display piece for marine enthusiasts.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each Hammerhead Shark is made to order, specially for you.
The Hammerhead takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These sharks are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each Hammerhead Shark will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Cinderwing3D.
Thank you for your purchase and support!
Color:
Quantity:
Bring the Ocean to Life with a 3D Printed Articulating Hammerhead Shark!
These 3D Printed Articulating Hammerheads are crafted in PLA and measure 7 inches long by 5 inches wide. With fully articulating joints from head to tail, this design captures the lifelike movement of this iconic ocean predator. Perfect as a unique gift, playful fidget toy, or captivating display piece for marine enthusiasts.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each Hammerhead Shark is made to order, specially for you.
The Hammerhead takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These sharks are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each Hammerhead Shark will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Cinderwing3D.
Thank you for your purchase and support!
These 3D Printed Articulating Hammerheads are crafted in PLA and measure 7 inches long by 5 inches wide. With fully articulating joints from head to tail, this design captures the lifelike movement of this iconic ocean predator. Perfect as a unique gift, playful fidget toy, or captivating display piece for marine enthusiasts.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each Hammerhead Shark is made to order, specially for you.
The Hammerhead takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These sharks are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each Hammerhead Shark will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Cinderwing3D.
Thank you for your purchase and support!
Bring the Ocean to Life with a 3D Printed Articulating Hammerhead Shark!
These 3D Printed Articulating Hammerheads are crafted in PLA and measure 7 inches long by 5 inches wide. With fully articulating joints from head to tail, this design captures the lifelike movement of this iconic ocean predator. Perfect as a unique gift, playful fidget toy, or captivating display piece for marine enthusiasts.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each Hammerhead Shark is made to order, specially for you.
The Hammerhead takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These sharks are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each Hammerhead Shark will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Cinderwing3D.
Thank you for your purchase and support!
These 3D Printed Articulating Hammerheads are crafted in PLA and measure 7 inches long by 5 inches wide. With fully articulating joints from head to tail, this design captures the lifelike movement of this iconic ocean predator. Perfect as a unique gift, playful fidget toy, or captivating display piece for marine enthusiasts.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each Hammerhead Shark is made to order, specially for you.
The Hammerhead takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These sharks are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each Hammerhead Shark will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Cinderwing3D.
Thank you for your purchase and support!