3D Printed Articulating Dolphin – Flexible Design with Painted or Non-Painted Eyes
from $6.99
Bring Fun to Life with 3D Printed Articulating Creatures!
These 3D-Printed Articulating Creatures are crafted from PLA and measure approximately 5.5 inches. The dolphins are fully articulating, including their tail and fins, adding a playful touch to their design.
They are available in two variations:
Painted Eyes
Non-Painted Eyes
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each flexi creature is made to order, specially for you.
The creature takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These creatures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each creature will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
These 3D-Printed Articulating Creatures are crafted from PLA and measure approximately 5.5 inches. The dolphins are fully articulating, including their tail and fins, adding a playful touch to their design.
They are available in two variations:
Painted Eyes
Non-Painted Eyes
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each flexi creature is made to order, specially for you.
The creature takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These creatures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each creature will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
Primary color:
Style:
Quantity:
Bring Fun to Life with 3D Printed Articulating Creatures!
These 3D-Printed Articulating Creatures are crafted from PLA and measure approximately 5.5 inches. The dolphins are fully articulating, including their tail and fins, adding a playful touch to their design.
They are available in two variations:
Painted Eyes
Non-Painted Eyes
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each flexi creature is made to order, specially for you.
The creature takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These creatures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each creature will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
These 3D-Printed Articulating Creatures are crafted from PLA and measure approximately 5.5 inches. The dolphins are fully articulating, including their tail and fins, adding a playful touch to their design.
They are available in two variations:
Painted Eyes
Non-Painted Eyes
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each flexi creature is made to order, specially for you.
The creature takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These creatures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each creature will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
Bring Fun to Life with 3D Printed Articulating Creatures!
These 3D-Printed Articulating Creatures are crafted from PLA and measure approximately 5.5 inches. The dolphins are fully articulating, including their tail and fins, adding a playful touch to their design.
They are available in two variations:
Painted Eyes
Non-Painted Eyes
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each flexi creature is made to order, specially for you.
The creature takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These creatures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each creature will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
These 3D-Printed Articulating Creatures are crafted from PLA and measure approximately 5.5 inches. The dolphins are fully articulating, including their tail and fins, adding a playful touch to their design.
They are available in two variations:
Painted Eyes
Non-Painted Eyes
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each flexi creature is made to order, specially for you.
The creature takes roughly 6 to 12 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These creatures are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each creature will be carefully inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by Flexi Factory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!