3D Printed Articulating Coral Reef Dragon – 22in and 13in Sizes – Flexi Dragon – Ocean Fidget Toy
from $11.99
Dive into the beauty of the sea with this 3D Printed Articulating Coral Reef Dragon! Available in two sizes, 13 inches or 22 inches long, this dragon is adorned with intricate coral-like details along its body, adding vibrant oceanic charm. Its flexible joints allow lifelike movement, making it a captivating décor piece, playful fidget toy, or thoughtful gift for ocean lovers and collectors alike.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Coral Reef Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
This design was created by Cinderwing3D, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Coral Reef Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
This design was created by Cinderwing3D, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
Color:
Size:
Quantity:
Dive into the beauty of the sea with this 3D Printed Articulating Coral Reef Dragon! Available in two sizes, 13 inches or 22 inches long, this dragon is adorned with intricate coral-like details along its body, adding vibrant oceanic charm. Its flexible joints allow lifelike movement, making it a captivating décor piece, playful fidget toy, or thoughtful gift for ocean lovers and collectors alike.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Coral Reef Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
This design was created by Cinderwing3D, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Coral Reef Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
This design was created by Cinderwing3D, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
Dive into the beauty of the sea with this 3D Printed Articulating Coral Reef Dragon! Available in two sizes, 13 inches or 22 inches long, this dragon is adorned with intricate coral-like details along its body, adding vibrant oceanic charm. Its flexible joints allow lifelike movement, making it a captivating décor piece, playful fidget toy, or thoughtful gift for ocean lovers and collectors alike.
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Coral Reef Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
This design was created by Cinderwing3D, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
The colors on rainbow filaments transition at varying points along the spool, meaning the colors on your printed item will appear randomly and cannot be predetermined. Additionally, due to the nature of rainbow PLA, some colors may not appear on smaller items, as the filament may not transition through all colors within the smaller print size. Thank you for your understanding!
Each dragon is made at the time of your order specially for you.
The Coral Reef Dragon takes roughly 12 to 24 hours to print, depending on the size chosen, so please understand that there may be a slight delay between ordering and shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so please understand there may be small imperfections in the finish. Please note this does not affect the durability or quality of the item at all, and each dragon will be thoroughly inspected before shipping.
This design was created by Cinderwing3D, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!