3D Printed Articulating Clover Dragon – 18in Long – St. Patrick's Day Décor – Flexi Dragon
$31.99
Celebrate Luck and Nature with a 3D Printed Articulating Clover Dragon!
This 3D Printed Articulating Clover Dragon is crafted in PLA and measures approximately 18 inches long. The body is adorned with intricate clover patterns and stunning gold coins, creating a unique and natural design that’s perfect for celebrating St. Patrick’s Day or as a gift for dragon enthusiasts.
The entire body of the dragon, including its legs and the clover on its tail, articulates, making it both interactive and decorative.
Each Clover Dragon is made to order, specially for you.
The Clover Dragon, embellished with captivating gold coins, takes roughly 24 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by FlexiFactory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
This 3D Printed Articulating Clover Dragon is crafted in PLA and measures approximately 18 inches long. The body is adorned with intricate clover patterns and stunning gold coins, creating a unique and natural design that’s perfect for celebrating St. Patrick’s Day or as a gift for dragon enthusiasts.
The entire body of the dragon, including its legs and the clover on its tail, articulates, making it both interactive and decorative.
Each Clover Dragon is made to order, specially for you.
The Clover Dragon, embellished with captivating gold coins, takes roughly 24 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by FlexiFactory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
Quantity:
Celebrate Luck and Nature with a 3D Printed Articulating Clover Dragon!
This 3D Printed Articulating Clover Dragon is crafted in PLA and measures approximately 18 inches long. The body is adorned with intricate clover patterns and stunning gold coins, creating a unique and natural design that’s perfect for celebrating St. Patrick’s Day or as a gift for dragon enthusiasts.
The entire body of the dragon, including its legs and the clover on its tail, articulates, making it both interactive and decorative.
Each Clover Dragon is made to order, specially for you.
The Clover Dragon, embellished with captivating gold coins, takes roughly 24 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by FlexiFactory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
This 3D Printed Articulating Clover Dragon is crafted in PLA and measures approximately 18 inches long. The body is adorned with intricate clover patterns and stunning gold coins, creating a unique and natural design that’s perfect for celebrating St. Patrick’s Day or as a gift for dragon enthusiasts.
The entire body of the dragon, including its legs and the clover on its tail, articulates, making it both interactive and decorative.
Each Clover Dragon is made to order, specially for you.
The Clover Dragon, embellished with captivating gold coins, takes roughly 24 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by FlexiFactory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
Celebrate Luck and Nature with a 3D Printed Articulating Clover Dragon!
This 3D Printed Articulating Clover Dragon is crafted in PLA and measures approximately 18 inches long. The body is adorned with intricate clover patterns and stunning gold coins, creating a unique and natural design that’s perfect for celebrating St. Patrick’s Day or as a gift for dragon enthusiasts.
The entire body of the dragon, including its legs and the clover on its tail, articulates, making it both interactive and decorative.
Each Clover Dragon is made to order, specially for you.
The Clover Dragon, embellished with captivating gold coins, takes roughly 24 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by FlexiFactory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!
This 3D Printed Articulating Clover Dragon is crafted in PLA and measures approximately 18 inches long. The body is adorned with intricate clover patterns and stunning gold coins, creating a unique and natural design that’s perfect for celebrating St. Patrick’s Day or as a gift for dragon enthusiasts.
The entire body of the dragon, including its legs and the clover on its tail, articulates, making it both interactive and decorative.
Each Clover Dragon is made to order, specially for you.
The Clover Dragon, embellished with captivating gold coins, takes roughly 24 hours to print, so please understand that there may be a slight delay between ordering and shipping.
I will personally ensure that a message is sent to you confirming the order and providing an ETA on shipping time.
These dragons are 3D printed, so minor imperfections in the finish may occur. However, this does not affect the durability or quality of the item, and each dragon will be thoroughly inspected before shipping.
⚠️ Safety Warning: This product contains small parts that could pose a choking hazard and is not intended for young children. While durable under normal use, it may be damaged if handled roughly or misused. Please supervise children if allowing them to interact with this product.
This design was created by FlexiFactory, and I have a commercial license which gives me the rights to sell prints of their digital designs.
Thank you for your purchase and support!